3M Super Close Projection System scp716

This DLP Projector with 3M™ Vikuiti™ Super Close Projection technology can project the same size image from 40 inches the same way a conventional projector does from 10 feet away.

Endless Combinations

The SCP716 works with computers‚ DVD players‚ camcorders‚ document cameras/tablets and with most brands of interactive whiteboards to turn information and lesson plans into interactive opportunities for educational enrichment.

Spending Wisely

With decreasing budgets and increasing educational requirements, schools must find ways to deliver a better learning environment with better technology solutions with restricted funds. The SCP716 features a low Total Cost of Ownership and is fast as well as easy to install.

Why it’s Better Than the Rest

59” - 91” diagonal image with SCP wall mount Folding wall mount options provide added safety Basic or full connectivity – your choice! XGA (1024 x 768) native resolution Great for use with most brands of interactive whiteboards or with existing dry-erase boards 2400 lumens (maximum rating) 5000 hr lamp life (eco mode) The 3M SCP716 Projector can also stand alone as a tabletop projector or can be ceiling-mounted if a wall mount is not practical for your environment.

al2430-2ph New Classroom Security & Sound Reinforcement System

The Atlas Learn AL2430 system is an in-classroom sound reinforcement solution designed for K-12 and higher education facilities or where a room constrained public address system is required. This complete audio package consists of amplifier/receiver, wireless microphones, and docking station. Together they enable teachers and students to walk freely around the room with the infrared microphones/system control units and project their voices through installed speakers.

With even sound distribution, lessons can be heard easily no matter where students are seated. By reinforcing sound within the classroom you not only raise student’s attention and concentration, but teachers no longer need to strain their voice and can easily integrate with multimedia teaching tools such as computers and DVD players by controlling audio from a single source. In addition, priority paging and emergency notification allows you to inform other locations of the need for outside assistance.

al2430 Pendant ir Transmitter

The versatile and ergonomic AL2430 pendant/handheld microphone transmitter allows both teachers and students to move freely without bulky electronics or annoying wires. The dual mode transmitter allows teachers to control microphone volume, overall system volume and mute settings with side mounted soft touch controls. In addition, when “PANIC” and “MODE” controls are pressed simultaneously a contact closure is triggered on the AL2430 receiver which may be integrated with most any intercom or IP based notification system to signal an emergency condition in the classroom. The transmitter can also be configured for “student” mode operation so that all controls are bypassed.

al2430 Integrated Receiver/Amplifier

The compact, ergonomically designed AL2430 receiver/amplifier provides intuitive control of all system components. It is equipped with several inputs in order to accommodate most any multimedia source, eliminating the need for dedicated AV systems and saving you valuable space in the classroom.

Microphone Charging Station

AL2430 charging station includes a dock section to charge two pendant transmitters and four AA rechargeable batteries simultaneously. The unit may be wall mounted via integral key hole slots or shelf mounted for easy accessibility.

Infrared Dome Sensors

Up to three infrared dome sensors may be used with the AL2430 receiver/amplifier (two are included with the system) along with two 10 meter sections of UL listed coaxial cable terminated with professional “F” connectors.

Available System Configurations

AL2430-2PH

Q-Sys from QSC

Q-Sys is a complete integrated system platform that encompasses everything from the audio input to loudspeakers. Q-Sys provides all the audio routing, processing, control and monitoring necessary for any facility while maintaining the audio quality and reliability QSC has come to be known for.

Designed specifically for the rigorous requirements of large-scale applications, Q-Sys is a good choice for stadiums and arenas, legislative and judicial chambers, hotels and casinos, houses of worship, corporate campuses, educational facilities or anywhere else that requires a powerful system-wide audio solution.

The primary elements of a Q-Sys system are the Core and I/O Frame.

The Core controls the system; it performs all the audio routing and processing and handles all control functions. The Q-Sys Core is available in three sizes, Core 1000, 3000, and 4000, and features a centralized processing architecture.

Having all processing take place in one unit gives the designer complete flexibility while enabling simplified system redundancy. With a centralized architecture any input can be routed to any output without convoluted signal paths.

Although Q-Sys uses a centralized structure, it is still able to physically locate the input and output connections near their sources and destinations using I/O Frames.

Each I/O Frame can have up to four I/O cards enabling up to 16 channels of input and/or output in a single unit. Available cards include: a 4-input standard and a 4-input premium-quality mic/line input card, 4-channel line output card, an AES card with 4-channels of input and output, and a 4-channel card for connection to QSC DataPort amplifiers. Additional cards to be added so check back for updated information.